HOW TO APPLY YOUR VINYL DECAL!

1. Clean the Surface: Wipe the area where you want to apply the decal with soap and water. Make sure it’s dry and free of dust or grease.
2. Position the Decal: Place the decal on the surface without removing the backing to check placement. Use a piece of masking tape to hold it in place if needed.
3. Peel the Backing: Carefully peel off the backing from the vinyl, leaving the design on the transfer tape.
4. Apply the Decal: Place the decal on the surface and press down gently with your fingers.
5. Smooth Out Bubbles: Use a squeegee or a credit card to press the decal from the center outward, removing air bubbles.
6. Remove Transfer Tape: Slowly peel off the transfer tape at a sharp angle, leaving the vinyl decal on the surface.
7. Final Touches: Press down any edges that didn’t stick properly and enjoy your new decal!